Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 21)

NetEngine IAD User Guide
Introduction 2
Data
Interfaces
The data connection through the IAD supports IEEE 802.10-compliant
bridging and routing.
When the IAD is configured for routing, it supports Routing Information
Protocol (RIP) version 1, version 2, or static IP routing. The IAD complies
with RFC-1812 when interfacing with Version 4 IP routers.
The WAN subsystem supports the following interfaces:
u ATM data transport via xDSL and T1/E1 per RFC 1483 or RFC 2364
u Frame Relay data transport via xDSL and T1/E1 per RFC 1490
u Frame Relay data transport per RFC 1483 with Q.922 frames
NetEngine
6000 IAD
Family
The Verilink

NetEngine
ä
6000 IAD family provides a highly
interoperable, cost-effective voice and high-speed data integration solution
that is compatible with industry-leading DSLAM and Voice Gateway
manufacturers. These IADs prioritize voice packets and dynamically
allocate bandwidth between voice and data services.
Features
u Interoperable with DSLAMs based on Alcatel, Texas Instruments,
MetaLink, and Globespan chip sets. These include Lucent Stinger/
TNT, Nokia Speedlink System, Promatory IMAS, AccessLan
PacketLoop, Accelerated Networks AN-3200, CopperMountain
CopperEdge, and Paradyne GranDSLAM DSLAMs, for example.
u Seamless voice and high-speed data integration over xDSL or T1/E1
u Supports data rates from 144 Kbps to 2.3 Mbps and customer premise
interfaces including POTS, 10/100BaseT Ethernet, BRI
u Compatible with WAN protocols including ATM and Frame Relay
u BRI IAD supports ISDN BRI telephone interface
u RJ11 POTS interface with Loop Start or Ground Start
u Dynamic and static IP routing and bridging capabilities
u Firewall support via IP filtering
u DHCP and NAT to support IP address management
u Management capabilities including Telnet, SNMP and TFTP
IADs in the 6000 family are characterized by different WAN interfaces, and
different voice capacity:
u NetEngine 6100 IADs—provides WAN access over ADSL, and
telephone support for 4 or 8 voice ports (6100-4 and 6108).
u NetEngine 6200-8 IAD—provides WAN access via T1 lines, and
provides 8 voice ports.
u NetEngine 6200c IADs—provides WAN access via channelized T1/
E1 lines, and provides 4 or 8 voice ports (6204c and 6208c).
u NetEngine 6300 IADs—provides voice services and high-speed
Internet or corporate connectivity over SDSL, and provides 4 or 8 voice
ports (6300-4 and 6300-8).