Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 266)

NetEngine IAD User Guide
Command Line Interface 247
set bridge
stp global
Description. Enables or disables Spanning Tree Protocol globally.
set bridge stp global <on | off>
on | off
Keyword to enable (on) or disable (off) STP globally.
set dhcp
server
enable
Description. Enables or disables DHCP server on the IAD.
set dhcp server enable <on | off>
on | off
Keyword to enable (on) or disable (off) DHCP server.
set dhcp
server
gateway
Description. Sets the DHCP server default IP address.
set dhcp server gateway <IP address>
IP address
IP address of the DHCP server, in octal format (999.999.999.999)
set dhcp
server
subnet
Description. Sets the DHCP server default subnet mask.
set dhcp server subnet <subnet mask>
subnet mask
Subnet mask in octal format (255.255.255.255)
set dhcp
server dns
Description. Sets the DHCP DNS server IP address.
set dhcp server dns <IP address>
IP address
IP address in octal format (999.999.999.999)
set dhcp
server
netbios
Description. Sets the DHCP NetBIOS server IP address.
set dhcp server netbios <IP address>
IP address
IP address in octal format (999.999.999.999)
set dhcp
server
domain
Description. Sets the DHCP server domain name.
set dhcp server domain <domain name>
domain name
Fully-qualified domain name