Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 115)

NetEngine IAD User Guide
WAN Configuration 96
16. If you type 2, the IAD displays the fragment size prompt:
Enter maximum fragment size in bytes (100-1600) [0]:
Type the fragment size in bytes and press Enter.
17. The IAD displays the End-to-End Fragmentation Configuration menu.
Press Escape to return to the FR DLCI Config menu.
18. Reset the IAD (page 15 ) when you finish DLCI configuration.
Deleting a DLCI
To delete a DLCI:
1. On the Frame Relay DLCI Configuration menu, type 3 to select Delete
DLCI.
2. The IAD displays the port list and prompt:
Port DLCI Encapsulation
1 16 RAW (No Encapsulation)
Select Port: [1-8]
Type the port number corresponding to the DLCI you want to delete.
a. To permanently remove the DLCI configuration, type
y .
b. To cancel the operation, type n .
3. Reset the IAD (page 15 ) when you finish DLCI configuration.
Displaying Current DLCIs
To display a list of the current DLCIs, type 4 on the Frame Relay DLCI
Configuration menu.
The IAD displays the port list:
Port DLCI Encapsulation
---- ----- -------------
1 16 RAW (No Encapsulation)
4. Press any key to display the Frame Relay DLCI Configuration menu.