Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 198)

NetEngine IAD User Guide
DHCP Server Configuration 179
Displaying
DHCP
Entry
Details
Type D to display DHCP entry details. The IAD displays the following
information about the DHCP entries:
For the IAD to display this information, you must attach DHCP Client
devices that use DHCP to obtain an IP address from the IAD.
Deleting a
DHCP
Client Entry
Type X to delete a DHCP client entry.
1. The IAD displays a prompt:
Enter Client entry number to delete (1...10) >
Type the number of the client entry to delete and press Enter.
2. The IAD deletes the client entry from the table and saves the new
configuration.
3. Reset the IAD (page 15 ) for changes to take effect.
Deleting a
DHCP
Assign-
ment Entry
Type Y to delete a DHCP Assignment Entry.
1. The IAD prompts you for the DHCP entry index number to delete:
Enter DHCP entry index number (1 - 4) >
Type the index number to delete and press Enter.
2. The IAD deletes the assigned IP address from the Display DHCP
Server Assigned Addresses command and saves the new
configuration.
3. Reset the IAD (page 15 ) for changes to take effect.
Table 9–4. DHCP Entry Details
Value Description
IP address IP address of the device.
Client ID Ethernet MAC address for the device.
Status how the IP address is assigned to the device—via DHCP
server, or manually.
Subnet IP subnet mask; number of bits reserved for host ID.
Gateway IP address of packets sent to destination.
DNS P address of the DNS server.
Lease length of time to keep the Internet connection active.
Type type of IP address: static or dynamic.
Name name of the device.