Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 268)

NetEngine IAD User Guide
Command Line Interface 249
set lan
bridge
Description. Enables or disables bridging on a LAN port.
set lan bridge <on | off> (slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) bridging on the specified port.
IP address
IP address in octal format (999.999.999.999)
netmask
Subnet mask in octal format (255.255.255.255)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ETHERNET | ADSL | XDSL | SDSL
port
Port number (1 to 8)
set lan ip
address
Description. Sets the LAN IP address. If you do not enter any optional
parameters, the IAD sets the address on the first available slot, interface,
port and connection. If connection is omitted, the first is used.
set lan ip address <IPaddress> <netmask> (slot)
(interface) (port) (connection)
IP address
IP address in octal format (999.999.999.999)
netmask
Subnet mask in octal format (255.255.255.255)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ETHERNET | ADSL | XDSL | SDSL
port
Port number (1 to 8)
connection
Index of this IP address associated with the port (0-7)