Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 259)

NetEngine IAD User Guide
IAD Reports 240
Otherwise, the following information is displayed for each entry:
Press any key to return to the Reports menu.
System
Uptime
Report
Type U on the Reports menu to display the amount of time elapsed since
the IAD was reset:
The system has been running for 11 hours,
45 minutes, 26 seconds.
Press any key to return to the Reports menu.
Memory
Statistics
Reports
Type O on the Reports menu to display the Memory Statistics menu. The
Memory Statistics menu (
1-O ) contains two memory display commands:
Figure 12–8. Memory Statistics Menu
To display a specific memory statistic report, type the option. For details,
see the corresponding section, following.
System Memory Statistics Report
Type M on the Memory Statistics menu to display the System Memory
Statistics report. The System Memory Statistics report displays the
following details about system memory:
Total Memory Size 8192KB (8388608 Bytes)
Total Allocated Memory 7454KB (7633688 Bytes)
Total Free Memory 737KB (754920 Bytes)
Kernel Memory Size 1152KB (1179648 Bytes)
Kernel Memory Allocated 901KB (922848 Bytes)
Allocated Blocks 1143 Blocks
Largest Alloc Block Size 159KB (163248 Bytes)
Table 12–30.PPP Authorization Report
Parameter Description
Authorization type None | Password Authentication Protocol (PAP)
Client | PAP Server |Challenge Handshake
Authentication Protocol (CHAP) Client | CHAP
Server
Slot #/Interface #/Port # active slot for the PPP interface
Userid/Password/Peer Name values for the PPP interface
***************************************************
Memory Statistic Menu
***************************************************
M. Display System Memory Statistic
T. Display Kernel Tasks Memory Statistic