Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 195)

NetEngine IAD User Guide
DHCP Server Configuration 176
Enter Y to enter a value for Subnet Mask
Enter N to use a default value
Current Subnet Mask = 0.0.0.0
Enter new Subnet Mask:
Type the subnet mask for this entry and press Enter.
7. The IAD displays an update option. Respond Y to override the default
gateway for this entry:
Enter Y to enter a value for Default Gateway
Enter N to use a default value
Current Gateway address = 0.0.0.0
Enter new Gateway IP address:
Type the default gateway address for this entry and press Enter.
8. The IAD displays an update option. Respond Y to override the DNS
server IP address default for this entry:
Enter Y to enter a value for DNS Server
Enter N to use a default value:
Current DNS Server address = 0.0.0.0
Enter new DNS Server IP address:
Type the default DNS Server IP address for this entry and press Enter.
9. The IAD displays an update option. Respond Y to override the
NetBIOS Server IP address default for this entry:
Enter Y to enter a value for NetBIOS Server
Enter N to use a default value:
Current NetBIOS Server address = 0.0.0.0
Enter new NetBIOS Server IP address:
Type the default NetBIOS Server IP address for this entry and press
Enter.
10. The IAD displays an update option. Respond Y to override the
NetBIOS Node Type default for this entry:
Enter Y to enter a value for NetBIOS Node Type
Enter N to use a default value
*******************************************
NetBIOS Type Configuration Menu
*******************************************
Current NetBIOS Node Type: Default
1. B-node
2. P-node
4. M-node
8. H-node
Type the default NetBIOS node type for this entry and press Enter.
11. The IAD saves the configuration.
12. Reset the IAD (page
15 ) for changes to take effect.