Setting compander mode, Figure 7–6. start mode selection menu, Set on hook transmis- sion mode – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 164: Figure 7–7. ground start oht mode selection menu, Set on hook transmission mode
NetEngine IAD User Guide
Voice Path Configuration
145
Setting
Compander
Mode
To set Compander Mode, type
U
to display the Compander Mode
Selection menu:
Figure 7–6. Start Mode Selection Menu
1. Type the option of the Compander mode to set.
2. The IAD saves the mode you’ve selected and displays the menu.
3. Press Escape to return to the Voice Configuration menu and continue
with other voice path configuration.
4. Reset the IAD (page
) when you finish voice path configuration.
Set On
Hook
Transmis-
sion Mode
To set On-hook Transmission mode (POTS only) for groundstart lines,
type
O
to display the Ground Start OHT Mode Selection menu:
Figure 7–7. Ground Start OHT Mode Selection Menu
1. Type
E
to enable onhook transmission mode, or
D
to disable it.
2. The IAD saves the mode you’ve selected and displays the menu.
3. Press Escape to return to the Voice Configuration menu and continue
with other voice path configuration.
4. Reset the IAD (page
) when you finish voice path configuration.
*******************************************
Compander Mode Selection
*******************************************
Current Compander Mode = u-Law
U. u-Law Mode
A. A-Law Mode
NOTE
If you are unsure which mode to use, check with your
telephone service provider. Normally, u-Law is used in North
America and a-Law is used in Europe.
*******************************************
Ground Start OHT Mode Selection
*******************************************
On Hook Transmission for a Ground Start Line is
DISABLED.
E. ENABLE Ground Start On Hook Transmission
D. DISABLE Ground Start On Hook Transmission