Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 272)

NetEngine IAD User Guide
Command Line Interface 253
set sdsl
speed
Description. Sets the SDSL speed. This command sets the speed to
manual framed (Nokia) or Auto Cycle (Nokia).
set sdsl speed <speed> <auto | manual>
speed
Keyword identifying speed: 2320 | 1744 | 1536 | 1152 | 768 | 384 | 192
auto | manual
Keyword identifying manual or auto cycle for Nokia.
set system
defaults
Description. Sets the system to the default parameters.)
set system defaults
set wan
atm ppp
auth
Description. Sets the PPPoATM options—RFC 2364 VC muxing PVCs,
as well as LLC Encapsulation PVCs. If authorization is PAP or CHAP, you
must specify an authentication type, UserID and password.
set wan atm ppp auth <NONE | PAP | CHAP> <ID>
<password> (slot) (interface) (port)
NONE | PAP | CHAP
Keyword to select authorization type.
ID
PPP user ID
password
PPP password
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)