Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 292)

NetEngine IAD User Guide
Verification 273
11. Using a straight-through cable, connect the Ethernet LAN port on the
IAD to your local LAN patch panel or hub|switch|router.
12. Connect the IAD telephone ports to the local distribution frame or
patch panel.
The IAD is ready for service.
Mainten-
ance
The IAD menu interface contains utilities reserved for factory maintenance
and development. Before running any System Utilities, call the Verilink
Technical Support Center at 800-285-2755 (toll-free).
Displaying
the Current
Configur-
ation
To display the current configuration and data transmission status:
1. On the Main menu, type 1 to display the Reports menu.
Figure 15–1. Reports Menu
2. Type C to display the current configuration. For more information, see
Current Configuration Report, on page 203 .
*******************************************
Reports Menu
*******************************************
C. Display Current Configuration
N. Display Network Statistics
I. Display Interface Statistics
M. Display Media Statistics
R. Display Route Table
A. Display ARP Table
B. Display Bridge Forwarding Database
S. Display Bridge Status
P. Display PPP Authorization Entries
U. Display System Uptime
O. Display Memory Statistic
Select Display Current Configuration.