Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 74
NetEngine IAD User Guide
WAN Configuration
55
LAN LINK
LAN ACT
WAN LINK
VOICE
POWER
6
6204c
6208c
7216c
Channelized T1 with Frame Relay
1. Set the datalink protocol to Frame Relay (page
2. Set up data and voice channels (page
3. Configure T1 (page
4. Configure DLCIs (page
5. Configure Frame Relay options (page
6. Configure the voice path (page
)
Channelized T1 with ATM
1. Set the datalink protocol to ATM (page
)
2. Set up data and voice channels (page
3. Configure T1 (page
4. Configure PVCs (page
5. Configure ATM (page
6. Configure the voice path (page
)
6300
LAN LINK
LAN ACT
WAN LINK
VOICE
POWER
6300-4
6300-8
7316
SDSL with Frame Relay
1. Set the datalink protocol to Frame Relay (page
2. Configure SDSL (page
3. Configure DLCIs (page
4. Configure Frame Relay options (page
5. Configure the voice path (page
)
SDSL with ATM
1. Set the datalink protocol to ATM (page
)
2. Configure SDSL (page
3. Configure PVCs (page
4. Configure ATM (page
5. Configure the voice path (page
)
LAN LINK
LAN ACT
WAN LINK
VOICE
POWER
6300-4
6400-8
To configure the physical interface of the 6300 IADs, you may
also use the Quick Configuration command. For more
information, see Quick Configuration on page
.
LAN LINK
LAN ACT
WAN LINK
VOICE
POWER
6504
6504i
6508
G.SHDSL with ATM
1. Set the datalink protocol to ATM (page
)
2. Configure G.SHDSL (page
)
3. Configure PVCs (page
4. Configure ATM (page
5. Configure the voice path (page
)
SDSL with ATM
1. Set the datalink protocol to ATM (page
)
2. Configure SDSL (page
3. Configure PVCs (page
4. Configure ATM (page
5. Configure the voice path (page
)