Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 150)

NetEngine IAD User Guide
Bridge Configuration 131
Bridge
Configur-
ation Menu
Configuring the IAD as a bridge involves several tasks. These are all
displayed and accessed on the Bridge Configuration menu (displayed by
typing
3 on the Main menu). Each task in this chapter is described
beginning at the Bridge Configuration menu.
Figure 6–2. Bridge Configuration Menu
You may sign on as Supervisor or Network Manager to configure the IAD
as a bridge. Options that display in the Bridge Configuration menu are the
same for both security levels.
*******************************************
Bridge Configuration Menu
*******************************************
G. Enable/Disable Bridging Globally
P. Enable/Disable Bridging by Port
A. Configure Bridge Aging Timer
T. Enable/Disable Spanning Tree Globally
O. Enable/Disable Spanning Tree by Port
R. Configure Spanning Tree Bridge Priority
Q. Configure Spanning Tree Port Priority
H. Configure Spanning Tree Hello Time
S. Configure Spanning Tree Max Age
F. Configure Spanning Tree Forward Delay
C. Configure Spanning Tree Path Cost
D. Delete Bridge Forwarding Database Entry
NOTE Be sure to reset the IAD when you are done making changes
to bridge configuration. Resetting the IAD causes the
configuration changes to take effect.