Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 124)

NetEngine IAD User Guide
Router Configuration 105
Router
Configur-
ation Menu
Router tasks are all displayed and accessed on the Router Configuration
menu (displayed by typing
2 on the Main menu). Tasks in this chapter are
described beginning at the Router Configuration menu.
Figure 5–2. Router Configuration Menu
You may sign on as Supervisor or Network Manager to configure the IAD
as a router. Options that display in the Router Configuration menu are the
same for both security levels.
*******************************************
Router Configuration Menu
*******************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
M. Configure Port Max Transmission Unit
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
Q. Configure IP Header Compression
B. Configure LAN IP Broadcast Destination
D. Display Route Table
NOTE Be sure to reset the IAD (page 15 ) when after making
changes to router configuration. Resetting the IAD causes the
configuration changes to take effect.