Performing file transfers, Figure 3–10. file transfer menu, Loading a boot rom file – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 64: Figure 3–11. file transfer method menu
NetEngine IAD User Guide
Administration
45
Performing
File
Transfers
The File Transfer menu allows you to transfer groups of files to or from the
IAD. To display the File Transfer menu, type
X
on the Utilities menu.
Figure 3–10. File Transfer Menu
To perform a specific task, type the option and proceed to the
corresponding section.
Loading a Boot ROM File
Type
B
to download the Boot ROM to the file system on the IAD.
Figure 3–11. File Transfer Method Menu
1. Type
1
to use TFTP, or
2
to use XMODEM to transfer the file to the
IAD. If you select XMODEM, proceed to step 4.
2. The IAD displays the prompt for the IP address of the TFTP server:
Enter ip address of TFTP server. ->
Type the IP address of the TFTP server and press Enter.
3. The IAD displays the following prompt for the file name to transfer:
Type the name of the file and press Enter. To exit without transferring
the file, press Escape or Enter without typing the file name.
4. When XMODEM is selected, if the file is not located, the IAD prompts
you for the file transfer speed.
5. The IAD transfers the file via TFTP or XMODEM.
6. Perform a hard reset to reset the IAD (page
) whenever you load a
new version of boot ROM. Performing a normal reset is not
recommended.
***************************************************
File Transfer Menu
***************************************************
B. Load Boot ROM
O. Update ACOS [acos.bin]
X. Update Entire System
A. File Transfer Utilities
T. TFTP Server Menu
***************************************************
File Transfer Method
***************************************************
1. Receive via TFTP
2. Receive via XMODEM