Set wan atm vc, Set wan bridge – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 273
NetEngine IAD User Guide
Command Line Interface
254
set wan
atm vc
Description. Sets an ATM VC on a given WAN port—RFC 1483 and RFC
2364 VC Muxing PVCs, as well as LLC Encapsulation PVCs. You must
specify VPI number, VCI number and RFC encapsulation type. If you do
not enter any optional parameters, it will find the first WAN slot, interface
and port.
set wan atm vc <vpi> <vci> <1483 | 2364> (slot)
(interface) (port)
vpi
Virtual Port Identifier (0 - 255)
vci
Virtual Circuit Identifier (32 - 65535—default is 38 for data and 39 for
voice)
1483 | 2364
Encapsulation keyword
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)
set wan
bridge
Description. Enables and disables bridging on a WAN port.
set wan bridge <on | off> (slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) bridging on the specified port.
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)