Netengine 7000 iad family, Features, Front panel power and status indicators – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 24
NetEngine IAD User Guide
Introduction
5
NetEngine
7000 IAD
Family
The Verilink
NetEngine
ä
7000 IAD family provides a highly
interoperable, cost-effective broadband solution for voice and high-speed
data integration that is compatible with industry-leading DSLAM and Voice
Gateway manufacturers. These IADs prioritize voice packets and
dynamically allocate bandwidth between voice and data services.
Features
u
Interoperable with DSLAMs based on Alcatel, Texas Instruments,
MetaLink, and Globespan chip sets. These include Lucent Stinger/
TNT, Nokia Speedlink System, Promatory IMAS, AccessLan
PacketLoop, Accelerated Networks AN-3200, Coppermountain
CopperEdge, and Paradyne GranDSLAM DSLAMs, for example.
u
Seamless voice and high-speed data integration over xDSL or T1/ITE1
u
Supports data rates from 144 Kbps to 2.3 Mbps and customer premise
interfaces including POTS, 10/100BaseT Ethernet
u
Compatible with WAN protocols including ATM and Frame Relay
u
RJ21X POTS interface with Loop Start or Ground Start
u
Universal Serial Interface supports V.35 and EIA-530
u
Dynamic and static IP routing and bridging capabilities
u
Firewall support via IP filtering
u
DHCP and NAT to support IP address management
u
Management capabilities including Telnet, SNMP and TFTP
IADs in the 7000 family are characterized by different WAN interfaces and
different voice capacity:
u
NetEngine 7216 IAD—provides WAN access over T1/E1, and
telephone support for 16 voice ports via RJ21X connector.
u
NetEngine 7216c IAD—provides WAN access over channelized T1,
and telephone support for 16 voice ports via RJ21X connector.
u
NetEngine 7316 IAD—provides WAN access over SDSL, and
telephone support for 16 voice ports via RJ21X connector.
Physical and electrical specifications for each IAD are listed in Appendix
C,
.
Front Panel Power and Status Indicators
The front panel of the IAD contains several LEDs. These LEDs provide
general information about the operational status of the IAD.