Port administration, Figure 7–13. port administration menu, Configuring admin state per port – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 172
NetEngine IAD User Guide
Voice Path Configuration
153
Port Administration
Type
A
to display the Port Administration menu:
Figure 7–13. Port Administration Menu
Setting Admin State Globally
1. Type
1
to enable or disable the admin state for all ports.
2. The IAD displays this prompt:
Enter E to Enable, D to Disable:
Type
E
to enable the admin state, or
D
to disable it.
3. The IAD saves the mode you’ve selected and displays the menu.
4. Press Escape to return to the Port Administration menu and continue
with other voice path configuration.
5. Reset the IAD (page
) when you finish voice path configuration.
Displaying the Current Admin State
Type
2
to display the current admin state by port number.
The IAD displays the following report:
1
DISABLED
2
ENABLED
3
DISABLED
4
DISABLED
Press any key to return to the Port Administration menu.
Configuring Admin State per port
1. Type
3
to enable or disable the admin state for a specific port. The IAD
displays the port prompt:
Select Line: [1-8]
Type the port number to set.
2. The IAD displays the following prompt:
Enter E to Enable, D to Disable:
Type
E
to enable the admin state, or
D
to disable it.
3. The IAD saves the mode you’ve selected and displays the menu.
4. Press Escape to return to the Port Administration menu and continue
with other voice path configuration.
5. Reset the IAD (page
) when you finish voice path configuration.
*******************************************
Port Administration Menu
*******************************************
1. Set Admin State for all ports
2. Display current Admin State
3. Configure Admin State per portS
4. Restart Endpoint
NOTE
These options are only available when you log in at the
Network Administrator or Supervisor levels.