Amer Networks SS2R48G4i V2 - Manual (Page 117)

SS2R24G4i/SS2R48G4i
106
Multicast Configuration
The same as scenario 1.
IGMP Snooping listening result
Similar to scenario 1.
11.4 IGMP SnoopingIGMP Snooping Troubleshooting
11.4.1 IGMP Snooping Monitor and Debug Command
11.4.1.1 debug igmp snooping all/packet/event/timer/mfc
Command debug igmp snooping all/packet/event/timer/mfc
no debug igmp snooping all/packet/event/timer/mfc
Function Enable the IGMP Snooping debug swithc of the switch; the “no debug igmp snooping
all/packet/event/timer/mfc” command is to disable the debug switch.
Command Mode Admin Mode
Default Setting By default the IGMP Snooping debug seitch of the switch is disabled.
11.4.1.2 show ip igmp snooping
Command show ip igmp snooping [vlan <vlan-id>]
Parameter <vlan-id> is vlan number of specify display IGMP Snooping information
Command Mode Admin mode
1. Display the summary infromation of IGMP Snooping of the switch
Displayed Informaton Explanation
Global igmp snooping status Whether the global igmp snooping switch of the swithc
is enabled.
Igmp snooping is turned on for
vlan 1(querier) Which vlans of the switch enable igmp snooping
function, and whether they are l2-general-queriers
2..Display the detailed information of IGMP Snooping of vlan1
Displayed Informaton Explanation
Igmp snooping L2 general
querier Whether vlan has started l2-general-querier function;
and display the state of the querier could-query or
suppressed
Igmp snooping query-interval The query interval of the vlan
Igmp snooping max reponse
time The max reponse time of the vlan
Igmp snooping robustness The robustness of the vlan