Amer Networks SS2R48G4i V2 - Manual (Page 57)

SS2R24G4i/SS2R48G4i
46
the switch
5.2.5.11 show tcp
Command show tcp
Function Display the current TCP connection status established to the switch.
Command mode Admin Mode
5.2.5.12 show udp
Command show udp
Function Display the current UDP connection status established to the switch.
Command mode Admin Mode
5.2.5.13 show telnet login
Command show telnet login
Function Display Telnet user information that links with the switch
5.2.5.14 show telnet user
Command show telnet user
Function Display all Telnet user information that can login the switch via Telnet.
Relative Command telnet-user password
5.2.5.15 show version
Command show version
Function Display the switch version.
Command mode Admin Mode
5.2.6 Debug
All the protocols SS2R24/48G4i switch switch supports have their corresponding debug
commands. The users can use the information from debug commands for troubleshooting. Debug
commands for their corresponding protocols will be introduced in the later chapters.
5.3 Configure the IP Address of the Switch
In theory, SS2R24/48G4i switch switch is a layer 2(Data Link Layer)device, which should not have
an IP address, because IP address is a concept belonged to layer 3(Network Layer).But, as a device
used in network, switch needs a network address to be its unique identifier, so that the network
manager can identify and control it.