1 returned information success, 2 returned information error, 6 fuzzy match support – Amer Networks SS2R48G4i V2 User Manual

Page 43: 2 web interfac

Advertising
background image

SS2R24G4i/SS2R48G4i

32

4.2.1.5.1 Returned Information success

All commands entered through keyboards undergo syntax check by the Shell. Nothing will be

returned if the user entered a correct command under corresponding modes and the execution is
successful.

4.2.1.5.2 Returned Information error

Returned Information error

Output error message

Explanation

Unrecognized command or illegal
parameter!

The entered command does not exist, or there is
error in parameter scope, type or format.

Ambiguous command

At least two interpretations is possible basing on
the current input.

Invalid command or parameter

The command is recognized, but no valid
parameter record is found.

This command is not exist in current
mode

The command is recognized, but this command
can not be used under current mode.

Please configure precursor
command "*" at first !

The command is recognized, but the
prerequisite command has not been configured.

syntax error missing '"' before the
end of command line!

Quotation marks are not used in pairs.


4.2.1.6 Fuzzy Match Support

SS2R24/48G4i switch switch shell support fuzzy match in searching command and keyword. Shell

will recognize commands or keywords correctly if the entered string causes no conflict.

For example

1. For command “show interfaces status ethernet 1”, typing “sh in e 1” will work

2. However, for command “show running-config”, the system will report a “> Ambiguous command!”

error if only “sh r” is entered, as Shell is unable to tell whether it is “show r” or “show running-config”.

Therefore, Shell will only recognize the command if “sh ru” is entered.

4.2.2 Web Interfac

The Web configuration interface has three parts the upper part, the bottom left part and the

bottom right part.

The upper part is a picture of the front panel of a SS2R24/48G4i switch switch, which can show the

connection state of each port via the LEDs on the panel. If users click the port on the picture of the front
panel, the statistic traffic information of each port will be displayed at the bottom right part of the Web

Advertising