Amer Networks SS2R48G4i V2 - Manual (Page 127)

SS2R24G4i/SS2R48G4i
116
Parameters detail whether display detailed information.
<Interfacename> interface name，like Ethernet 0/0/1or ethernet 0/0/1。
Default Settings None.
Command Mode Admin Mode
13.4.1.5 show ip multicast destination-control
Command show ip multicast destination-control [detail]
show ip multicast destination-control interface <Interfacename> [detail]
show ip multicast destination-control host-address <ipaddress> [detail]
show ip multicast destination-control <vlan-id> <mac-address> [detail]
Function To display the multicast destination configuration
Parameters detail whether display detailed information.
<Interfacename> interface name，like Ethernet 0/0/1 or port-channel 1 or ethernet 0/0/1。
Default Settings None.
Command Mode Admin Mode
13.4.2 11.4.2 DCSCM Troubleshooting
DCSCM module has similar function with ACL, the problems usually relate with incorrect configuration.
Please read the instruction above carefully. If you still cannot pin down the cause of the problems,
please send your configuration and the error messages to our technical support contact
[email protected] .