Amer Networks SS2R48G4i V2 - Manual (Page 71)

SS2R24G4i/SS2R48G4i
60
The configurations of SS2R24/48G4i switch switch as FTP and TFTP clients are almost the same,
so the configuration procedures for FTP and TFTP are described together in this manual.
5.5.2.2.1 FTP/TFTP Configuration Task List
1. FTP/TFTP client configuration
Upload/download the configuration file or system file.
（ 1） For FTP client, server file list can be checked.
2. FTP server configuration
（ 1） Start FTP server
（ 2） Configure FTP login username and password
（ 3） Modify FTP server connection idle time
（ 4） Shut down FTP server
3. TFTP server configuration
（ 1） Start TFTP server
（ 2） Configure TFTP server connection idle time
（ 3） Configure retransmission times before timeout for packets without acknowledgement
（ 4） Shut down TFTP server
1. FTP/TFTPconfiguration
(1)FTP client upload/download file
Command Explanation
Admin Mode
copy <source-url> <destination-url>
[ascii | binary]
FTP/TFTP client upload/download file
Global Mode
Dir <ftpServerUrl>
For FTP client, server file list can be
checked.
FtpServerUrl
format looks like ftp //user
password@IP Address
2.FTP server configuration
(1)Start FTP server
Command Explanation
Global Mode
ftp-server enable
no ftp-server enable
Start FTP server, the “no ftp-server enable”
command shuts down FTP server and
prevents FTP user from logging in.
(2)Set usename and password for FTP logging in
Command Explanation
Global Mode
ip ftp-server username <username>
password {0|7} <password>
no ip ftp-server username <username>
Set FTP server ‘s username and
password when logging in.