Amer Networks SS2R48G4i V2 - Manual (Page 30)

SS2R24G4i/SS2R48G4i
19
Selecting “6” in the Setup main menu exits the Setup configuration mode and saves the
configurations made. This is equivalent to running the Write command. For instance, if under the Setup
configuration mode, the user sets a Telnet user and enables Telnet service, and selects “5” to exit Setup
main menu. He/She will be able to configure the switch through Telnet from a terminal.
When exiting the Setup configuration mode, the CLI configuration interface appears. Configuration
commands and syntaxes will be described in detail in later chapters.