Amer Networks SS2R48G4i V2 - Manual (Page 183)

SS2R24G4i/SS2R48G4i
172
Command sntp timezone <name> {add | subtract} <time_difference>
no sntp timezone
Function Set the time difference between the time zone in which the SNTP client resides and UTC.
The “no sntp timezone” command cancels the time zone set and restores the default setting.
Parameter
<name> is the time zone name, up to 16 characters are allowed; <add> means the time
zone equals UTC time plus <time_difference>; <subtract> means the time zone equals UTC time
minus <time_difference>; <time_difference> is the time difference, from 1 to 12.
Default The default time difference setting is “add 8”.
Command mode Global Mode
21.1.4 show sntp
Command show sntp
Function To display the current configuration of SNTP client and the server state.
Parameters None
Command Mode Admin Mode.
Displayed Information Explanation
server address IP address of SNTP server;
version The version of SNTP protocol;
last receive The IP address of the last received SNTP
server.
21.1.5 debug sntp
Command debug sntp {adjust | packet | select }
no debug sntp {adjust | packet | select}
Function Displays or disables SNTP debug information.
Parameters adjust stands for SNTP clock adjustment information; packet for SNTP packets, select
for SNTP clock selection.
Command mode Admin Mode