Amer Networks SS2R48G4i V2 User Manual
Page 62
SS2R24G4i/SS2R48G4i
51
2. Configure SNMP community string
Command
Explanation
snmp-server community {ro|rw} <string>
no snmp-server community <string>
Configure the community string for the
switch; the “no snmp-server community
<string>
“ command deletes the configured
community string.
3. Configure IP address of SNMP management base
Command
Explanation
snmp-server securityip <ip-address>
no snmp-server securityip <ip-address>
Configure the secure IPv4/IPv6 address
which is allowed to access the switch on
the NMS; the “no snmp-server securityip
<ip-address>
“ command deletes
configured secure address.
snmp-server SecurityIP enable
snmp-server SecurityIP disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command
Explanation
snmp-server engineid < engine-string >
no snmp-server engineid < engine-string >
Configure the local engine ID on the switch.
This command is used for SNMP v3.
5. Configure user
Command
Explanation
snmp-server user <user-string>
<group-string>
[[encrypted] {auth {md5|sha}
<password-string>
}]
no snmp-server user <user-string>
<group-string>
Add a user to a SNMP group. This
command is used to configure USM for
SNMP v3.
6.Configure group
Command
Explanation
snmp-server group <group-string>
{NoauthNopriv|AuthNopriv|AuthPriv} [[read
<read-string>
] [write <write-string>] [notify
<notify-string>
]]
no snmp-server group <group-string>
{NoauthNopriv|AuthNopriv|AuthPriv}
Set the group information on the switch.
This command is used to configure VACM
for SNMP v3.
7. Configure view
Command
Explanation
snmp-server view <view-string>
<oid-string>
{include|exclude}
no snmp-server view <view-string>
Configure view on the switch. This
command is used for SNMP v3.