Amer Networks SS2R48G4i V2 - Manual (Page 88)

SS2R24G4i/SS2R48G4i
77
7.4 Port Troubleshooting
7.4.1 Monitor and Debug Command
7.4.1.1 clear counters ethernet
Command clear counters [ethernet <interface-list>]
Function Clear counters information on Ethernet interface
Parameters <interface-list> is the port ID of Ethernet
Command Mode Admin Mode
Default Do not delete the counters information on Ethernet interface
7.4.1.2 show interface ethernet
Command show interface ethernet <interface-list>
Function To display the information of the ports on the specified switch.
Parameters <interface-list> is the port ID, the format and value range of the port ID is explained in the
port introduction part of this chapter.
Command Mode Admin Mode