Using the graphing function – Yaskawa DriveWizard AC Drive User Manual
Page 106
Advertising
Using the Graphing Function
Using the Graphing Function
To start graphing follow these steps:
1. Connect the drive to the PC as described in Chapter 3
2. If parameters need to be changed, do this now (refer to Chapter 5: Parameter Editor)
3. Click on the Graph Tab (
) in the monitor area to display the graphing area. A
display similar to Figure 7.1 will appear. Before using the graphing function for the first
time, the function must be setup. On the right side of the Graph tab you will see a row of
buttons (Figur
e 7.2).
Figure 7.2: Graph Control Buttons
4. Click on the
Setup
button on the right of the graphing area and the tab for Graph #1 will
appear (Figure 7.3).
106
Advertising