Yaskawa DriveWizard AC Drive - Manual (Page 30)

If the file you are opening was created with a different database than the one
you have selected, a warning will appear as in Figure 3.13. If you are using a
standard database you can usually proceed by clicking on Yes . You should
check all of the parameters for proper values and do a compare against a
drive online to insure proper parameter data. If you are not sure, click No
and check which database is selected under File > Change database. If the
drive type is not support in the database, the warning in Figure 3.14 will
appear.
Note!
Working Offline
Figure 3.13: Database Version Warning
Figure 3.14: Inverter Not Supported Warning
30