Yaskawa DriveWizard AC Drive - Manual (Page 24)

4. Select the database best suited for your application. If your drive does not appear use the
standard database unless instructed by a Yaskawa representative to use a specific database.
5. Click on
OK to use the selected database and close the window.
If the change database menu item does NOT appear under File Menu you
have only 1 database installed in your DriveWizard
™ installation (Typical or
minimum selection during installation). If you determine you need a specific
database that is not standard drive, you must re-install DriveWizard
™ using
the Custom install selection. (see Chapter 2 – Installation)
Note!
Selecting a Database
24