Yaskawa DriveWizard AC Drive - Manual (Page 145)

GPD 50 d GPD P7 C sion Tables
Table 1: Parameter conversion
6/P5+ to E7 an 506/P5+ to onver
P5+
Par.
P5+ Parameter
Name
Conversion E7/P7
Par.
E7/P7 Parameter
Name
n001 it Param selection/ in NOT CONVERTED NA NA
n002 Op Mode Select See Table 2 b1-01 &
b1-02 Run Seq Select
Ref Select
n003 Motor Rated Voltage n003/10 = E1-01 E1-01 Input Voltage
n004 Stop Method If n004 > 1, then b1-03
=3, else n004 = b1-03 b1-03 Stopping Method
n005 Phase Rotation
n006 Reverse Prohibited
See Table 3 b1-04 Reverse operation
n007 Local/Remote None o2-01 l / Remote Key Loca
n008 Stop Key Function None o2-02
n009 Freq Ref Setting from
Digital Operator If n009=1, then o2-05=0,
else o2-05 = 1 o2-05 Freq Ref Setting Method
Selection
n010 V/F Pattern Select ONVERTED NA NOT C NA
n011 Max Frequency If n011 > 120.0 then E1-
04 =120.0, else n011 =
E1-04 E1-04 Max Output Freq.
n012 Max voltage None E1-05 Max Output Voltage
n013 Base Frequency If n013 > 200.0 then E1-
06 =200.0, else n013 =
E1-06 E1-06 Base Frequency
n014 Mid Frequency If n014 > 200.0 then E1-
07 =200.0, else n014 =
E1-07 E1-07 Mid Frequency
n015 Mid voltage None E1-08 Mid Voltage A
n016 Min Frequency None E1-09 Min Frequency
n017 Min V Min Voltage None E1-10 oltage
n018 Accel Time 1 If n018 > 999.9, then
n018*10 = C1-01, else
n018 = C1-01 C1-01 Acceleration Time 1
n019 Decel Time 1 If n019 > 999.9, then
n018*10 = C1-02, else
n019 = C1-02 C1-02 Deceleration Time 1
n020 Accel Time 2 n020 *10 = C1-03 C1-03 Acceleration Time 2
n021 Decel Time 2 n021*10 = C1-04 C1-04 Deceleration Time 2
n022 S-curve select NOT CONVERTED NA NA
n023 Operator Display Units If n023 >39 then n023*10
= o1-03, else n023 = o1-
03 o1-03 Digital Operator Display
Selection
n024 Freq Reference #1 n025*10 = d1-01 d1-01 Frequency Reference 1
n025 Freq Reference #2 n026*10 = d1-02 d1-02 Frequency Reference 2
n026 Freq Reference #3 n027*10 = d1-03 d1-03 Frequency Reference 3
n027 Freq Reference #4 n028*10 = d1-04 d1-04 Frequency Reference 4
n028 D Freq Reference #5 NOT CONVERTE NA NA
n029 Freq Reference #6 NOT CONVERTED NA NA
n030 Jog Reference n030*10 = d1-17 d1-17 Jog Freq. reference
n031 Freq Ref Upper Limit n031*10 = d2-01 d2-01 Freq Ref. Upper Limit
n032 Freq Ref Lower Limit n032*10 = d2-02 d2-02 Freq. Ref. Lower Limit
145