Yaskawa DriveWizard AC Drive - Manual (Page 65)

Read All
Toolbar:
Menu:
Inverter > Read All
Hot Keys: CTRL + U
The Read All function reads all the allowable parameters from the drive into the “Inverter” and
“Working Value” columns of the Parameter Editor when online. When activating this function
the window in Figure 4.36 appears.
Figure 4.36: Prompt for Overwriting Working Value Column
This warning is to let the user know that the drive parameter data in the Working Value column
will be overwritten. Clicking on
OK continues the operation. If you click on Cancel , no action
will be taken and the window will close.
If a Modbus error occurs during reading or writing parameter(s) to the
drive, this error means that there is a parameter mismatch between the
drive and DriveWizard
™ . A window will appear displaying the parameters
that have errors (see Figure 3.9). Check that the database you have selected
upports the drive software. s
L
Important !
Inverter Menu
65