Yaskawa DriveWizard AC Drive - Manual (Page 89)

Parameter Editor Spreadsheet
Parameter Editor Spreadsheet
Introduction
The parameter editor is probably the most commonly used feature in DriveWizard
™. This is
where the drive parameters are displayed and modified. The parameters are divided in groups
that have a tab or page at the top of the spreadsheet. The drive parameters are listed in rows
while the values and attributes for each parameter are divided into columns. An example is
shown in Figure 5.4 below.
Figure 5.4: Parameter Editor Spreadsheet Example
unction or purpose. We call these parameter
roups. These parameter groups will be shown as a page or tab on the Parameter Editor
Spreadsheet. In general there are four ways parameters can be separated into groups. You think
arameters within the group all have the same focus. For example, some drives may have a
“Term he parameters within this group would be related to adjustment of the
ive.
General Definition of Parameter Groups
Drive parameters will be categorized by their f
g
of the groups as separated by Subject, Range, User Application, and Unique Function,
although they are not referenced in this manner.
• Subject
P
inals” group. All t
input and output (I/O) terminals of drive.
• Range
Parameters are all in sequence. For example, one group may consist of the parameters from
number one through forty- nine (n001 to n049). Another group may be an extended range from
one through seventy- nine (n001 to n079). There will always be a group named “All”. This
would be an entire list of the parameters within the dr
89