Hitachi X200 Series - Manual (Page 60)

Please use the terminal arrangement below corresponding to your inverter model.
Inverter models X200-002SFEF~004SFEF, X200-005SFEF~022SFEF,
X200-002NFU~004NFU X200-007NFU~022NFU,037LFU
X200-004HFEF~040HFEF
X200-004HFU~040HFU
CAUTION: Power terminal assignment is different compared to old models such as L100, L200
series, etc,. Pay attention when wiring the power cable
NOTE: An inverter powered by a portable power generator may receive a distorted
power waveform, overheating the generator. In general, the generator capacity should
be five times that of the inverter (kVA).
L1 L2 N/L3
U/T1 V/T2 W/T3
- + +1
Jumper
U/T1 V/T2 W/T3 +1 + -
Jumper
L1 N/L3
L1 L2 L3
SFEF
NFU, LFU
HFEF, HFU
Jumper
Jumper
Jumper
Inverter Mountin
g
and i
n
st
all
a
tio
n
2−21