Hitachi X200 Series - Manual (Page 81)

“D” Function
Func.
Code
Name /
SRW Display
Description
Run
Mode
Edit
Units
Scaled output frequency
monitor
D007
F-Cnv 00000.00
Displays the output frequency
scaled by the constant in B086.
Decimal point indicates range:
XX.XX 0.00 to 99.99
XXX.X 100.0 to 999.9
XXXX. 1000. to 9999.
XXXX 1000 to 9999
(x10=10000 to 99999)
− Hz times
constant
Output voltage monitor D013
Vout 00000V
Voltage of output to motor,
Range is 0.0 to 600.0V
− V
Cumulative operation
RUN time monitor
D016
RUN 0000000hr
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 / 1000 to 9999 /
⎡100 to ⎡999 (10,000 to 99,900)
− hours
Cumulative power-on time
monitor
D017
RUN 0000000hr
Displays total time the inverter has
been powered up in hours.
Range is 0 to 9999 / 1000 to 9999 /
⎡100 to ⎡999 (10,000 to 99,900)
− hours
Cooling Fin temperature
monitor
D018
TH-Fin 0000.0 C
Temperature of the cooling fin.
(0.0~200)
− °C
Trip Event and History Monitoring
The trip event and history monitoring features lets you cycle through related
information using the keypad. See “ Monitoring Trip Events, History, & Conditions ” on
page 6-5 for more details.
“D” Function
Func.
Code
Name /
SRW Display
Description
Run
Mode
Edit
Units
Trip counter D080
ERR CNT 00000
Number of trip events,
Range is 0. to 9999
− events
Trip monitor 1 D081
ERR1 ########
−
Trip monitor 2 D082
ERR2 ########
− −
Trip monitor 3 D083
ERR3 ########
Displays trip event information:
• Error code
• Output freq. at trip point
• Motor current at trip point
• DC bus voltage at trip point
• Cumulative inverter operation
time at trip point
• Cumulative power-ON time at
trip point
− −
DC bus voltage monitor D102
Vpn 0000.0Vdc
Voltage of DC bus inside inverter,,
Range is 0.0 to 999.9 − V
Electronic thermal monitor D104
E-THM 0000.0%
Accumulated value of electronic
thermal detection, range is from 0.0
to 100.0
− %
3−7
Confi
guri
ng Driv
e
Parameters