Creating a port mirror, Figure 33: port mirroring tab (configuration) – Allied Telesis AT-S63 User Manual
Page 114
Advertising
Chapter 8: Port Mirroring
114
Section I: Basic Features
Creating a Port Mirror
To create a port mirror, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Layer 1 option.
The Layer 1 page opens with the Port Settings tab displayed by
default, as shown in Figure 20 on page 78.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 33 with any configured
mirror.
Figure 33. Port Mirroring Tab (Configuration)
This tab displays any port mirror already existing on the switch. If the
Mirror to Port column contains a 0 (zero), there is no port mirror.
4. Click Modify.
Advertising