Allied Telesis AT-S63 - Manual (Page 177)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 177
Deleting an Access Control List
To delete an access control list, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by default,
as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Network Security option.
The Network Security page is displayed with the Port Security tab
selected by default, as shown in Figure 158 on page 392.
3. Select the ACL tab.
The ACL tab is shown in Figure 54 on page 172.
4. Select the ACL you want to delete and click Delete. You can delete
only one access control list at a time.
The ACL is immediately deleted from the switch.
5. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)