Allied Telesis AT-S63 - Manual (Page 223)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 223
Displaying a List of Host Nodes
You can use the AT-S63 management software to display a list of the
multicast groups on a switch, as well as the host nodes. You can also view
the multicast routers. A multicast router is a router that is receiving
multicast packets from a multicast application and transmitting the packets
to host nodes.
To view host nodes, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Multicast option.
The Multicast page is displayed with the IGMP tab as shown in Figure
85.
Figure 85. IGMP Tab (Monitoring)
The IGMP tab provides the following information:
Enable IGMP Snooping Status
The IGMP snooping status on the switch. Possible settings are
Enabled and Disabled
Snoop Topology
Whether there is only one host node per switch port or multiple host
nodes per port. The possible settings are Edge (Single-Host/Port) and
Intermediate (Multi-Host/Port).