Allied Telesis AT-S63 - Manual (Page 146)

Chapter 11: Event Logs and Syslog Servers
146 Section II: Advanced Operations
4. To display events of a selected severity, in the Severity Selections
list, select one or more of the following severity types:
D - Debug
Debug messages provide detailed high-volume information that is
intended only for technical support personnel.
E - Error
Only error messages are displayed. Error messages indicate that the
switch operation is severely impaired.
W - Warning
Only warning messages are displayed. These messages indicate that
an issue may require manager attention.
I - Information
Only informational messages are displayed. Informational messages
display useful information that you can ignore during normal operation.
ALL
All messages of any type are displayed.
To select more than one severity, use <Ctrl> click.
5. To choose the chronological order of events in the display, for Display
Order, click one of the following:
Chronological
Displays the events in the order from the oldest event to the most
recent event. This is the default.
Reverse Chronological
Displays the events in from the most recent event to the oldest event.
6. To select the format of the event log, for Mode, click one of the
following:
Normal
Displays the time, module, severity, and description for each event.
This is the default. An example of Normal mode is shown in Figure 42
on page 148.
Full
Displays the same information as Normal, plus the file name, line
number, and event ID. An example of Full mode is shown in Figure 43
on page 149.