Displaying the gvrp port configuration – Allied Telesis AT-S63 User Manual
Page 365
AT-S63 Management Software Web Browser Interface User’s Guide
Section V: Virtual LANs
365
Displaying the GVRP Port Configuration
To display the GVRP port configuration, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed by
default, as shown in Figure 123 on page 302.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 148 on page 363.
4. In the View GVRP Parameters section, click View Port
Configuration.
5. Click View.
The GVRP Port Configuration page is shown in Figure 149.
Figure 149. GVRP Port Configuration Page
The GVRP Port Configuration page provides the following information:
Port Number
The port number.
Mode
The port mode, either Normal or None.