Allied Telesis AT-S63 - Manual (Page 209)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 209
The Modify Policy page is shown in Figure 77.
Figure 77. Modify Policy Page
5. Modify the following parameters as necessary:
ID
Specifies the ID number for this policy. The range is 0 to 255.
Description
Specifies the policy description. A description can be up to 15
alphanumeric characters, including spaces.
Remark DSCP
Specifies the conditions under which the ingress DSCP value is
overwritten. Select one of the following options from the list:
None - Disables this function.
All - All packets are remarked.
DSCP Value
Specifies a replacement value to write into the DSCP (TOS) field of the
packets. The range is 0 to 63.
Traffic Class List
Specifies the traffic classes to be assigned to the policy. The traffic
classes must already exist. Select the classes from the list. To select
more than one, use <Ctrl> click.
Ingress Port List
Specifies the ingress ports to which the policy is to be assigned. Select
the ports from the list. To select more than one, use <Ctrl> click. A port
can be an ingress port of only one policy at a time.