Allied Telesis AT-S63 - Manual (Page 32)

Chapter 1: Starting a Web Browser Management Session
32 Section I: Basic Operations
Saving Your Parameter Changes
When you make a change to a switch parameter, the change is, in most
cases, immediately activated as soon as you click the Apply button on the
web page. However, a change to a switch parameter is initially saved only
to temporary memory. It is lost the next time you reset or power cycle the
unit. To permanently save a change, you must click the Save Config
option on the Configuration menu, shown in Figure 4. Selecting the option
updates the switch’s active configuration file. A change saved to the active
configuration file is retained even when the unit is powered off or reset.
This menu option is displayed only after you have made configuration
changes. After you click Save Config, your changes are added to the
active configuration file and the option is removed from the menu.
Figure 4. Save Config Option in the Configuration Menu
Save Config
Option