Allied Telesis AT-S63 - Manual (Page 413)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VI: Port Security 413
The 802.1x Port Access tab is shown in Figure 170.
Figure 170. 802.1x Port Access Tab (Monitoring)
The RADIUS Accounting section provides the following information:
Accounting
The status of RADIUS accounting, either Enabled or Disabled.
Trigger Type
The action that causes the switch to send accounting information to
the RADIUS server. The possible settings are:
Start_Stop - The switch sends accounting information whenever a
client logs on or logs off the network. This is the default.
Stop - The switch sends accounting information only when a client logs
off.
Port Number
The UDP port for RADIUS accounting.
Type
The type of RADIUS accounting. The default is Network.
Accounting Update
Whether or not the switch sends interim accounting updates to the
RADIUS server. The options are Enabled or Disabled.