Allied Telesis AT-S63 - Manual (Page 398)

Chapter 25: 802.1x Port-based Network Access Control
398 Section VI: Port Security
Setting Port Roles
To set port roles for port-based network access control, perform the
following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Network Security option.
The Network Security page opens with the Port Security tab selected
by default, as shown in Figure 158 on page 392.
3. Select the 802.1x Port Access tab.
The 802.1x Port Access tab is shown in Figure 162.
Figure 162. 802.1x Port Access Tab (Configuration)