Allied Telesis AT-S63 - Manual (Page 445)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VII: Management Security 445
The middle section of the tab lists the existing ACEs on the switch. The
bottom portion is used to add and delete entries. For instructions, refer
to “Creating an ACE” on page 446 and “Deleting an ACE” on
page 448,
3. Click either Enable MGMT. ACL or Disable MGMT. ACL. The default
setting is disabled.
4. Click Apply.
A change to the status of the management ACL is immediately
activated on the switch.
Note
If you activate the feature before entering an access control entry
that specifies your management workstation, either by its IP address
or subnet, your web browser management session will end and you
will not be able to reestablish it.
5. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)