Allied Telesis AT-S63 - Manual (Page 62)

Chapter 3: Enhanced Stacking
62 Section I: Basic Operations
Displaying the Enhanced Stacking Status
To display the enhanced stacking status of the switch, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 179 on
page 436.
3. Select the Enhanced Stacking tab.
The Enhanced Stacking tab is shown Figure 13.
Figure 13. Enhanced Stacking Tab (Monitoring)
The information in the tab states the current enhanced stacking status
of the switch as master, slave, or unavailable.