Allied Telesis AT-S63 User Manual
Page 310
Advertising
Chapter 19: Spanning Tree and Rapid Spanning Tree Protocols
310
Section IV: Spanning Tree Protocols
4. Click View.
The Monitor STP Parameters tab is shown in Figure 129.
Figure 129. Monitor STP Parameters Tab (Monitoring)
5. To view port settings, click a port in the switch and click Status or
Settings.
The STP Settings page is shown in Figure 130.
Figure 130. STP Settings Page
The STP Settings page displays a table that contains the following
columns of information:
Port
Port number.
Advertising