Allied Telesis AT-S63 - Manual (Page 179)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 179
case the packets are accepted by the port, because a Permit ACL
overrides a Deny ACL.
Active
Whether or not the ACL is active. A status of Yes means that the ACL
is assigned to at least one port on the switch. A status of No means the
ACL is not assigned to any ports and therefore is inactive.
Classifier List
The classifiers assigned to the ACL.
Port List
The port assignments of the ACL.
4. To view the same information for each ACL, select the ACL and click
View.
The View ACLs page opens, as shown in Figure 58.
Figure 58. View ACLs Page
The View ACLs page displays the following information:
ID
The ID number for the ACL.
Description
The description of the ACL.
Classifier List
The classifiers assigned to this ACL.
Port List
The ports where the ACL is assigned.
Action
The ACL action of Permit or Deny. An action of Permit means the port
accepts the packets that meet the criteria of the classifiers assigned to
the ACL. An action of Deny means the port discards the packets,
unless the packets also match the criteria of a Permit ACL.
5. Click Close.