Allied Telesis AT-S63 - Manual (Page 188)

Chapter 14: Class of Service
188 Section II: Advanced Operations
Displaying the CoS Settings
To display the CoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select Services.
The Services page is displayed with the CoS tab selected by default,
as shown in Figure 62.
Figure 62. CoS Tab (Monitoring)
3. Click the port where you want to view the settings. You can select
more than one port at a time. A selected port turns white. (To deselect
a port, click it again.)
4. Click View.