Allied Telesis AT-S63 - Manual (Page 408)

Chapter 25: 802.1x Port-based Network Access Control
408 Section VI: Port Security
4. To see the status of the port, click the port and click Status. You can
select more than one port at a time.
The Port Access Port Status page is shown in Figure 167.
Figure 167. Port Access Port Status Page
The Port Access Port Status page displays a table that contains the
following columns of information:
Port
The port number.
Port Role
The port role: None, Authenticator, or Supplicant.
Status
The options include: Initialize, Disconnected, and so forth.
Additional Info.
More information about the port including the MAC address.
Displaying the
Port Settings
To display the port-based network access control port settings, perform
the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select Network Security.
The Network Security page is displayed with the Port Security tab
selected by default, as shown in Figure 160 on page 395.
3. Select the 802.1x Port Access tab.
The 802.1x Port Access tab is shown in Figure 166 on page 407.
4. To review the port access settings, click OK to close the Port Access
Port Status page and return to the 802.1x Port Access tab