Allied Telesis AT-S63 - Manual (Page 43)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 43
Comments
The location of the switch, (for example, 4th Floor - rm 402B).
BOOTP/DHCP
The status of the BOOTP and DHCP client software. If enabled, the
switch is obtaining its IP information from a BOOTP or DHCP server on
the network.
MAC Address Aging Time
The time interval an inactive dynamic MAC address can remain in the
MAC address table before it is deleted.
IP Address
The switch’s IP address.
Subnet Mask
The switch’s subnet mask.
Default Gateway
The IP address of a router for remote management.
System Up Time
The length of time since the switch was last reset or power cycled.
The System Software section displays the following information:
Application Software
The version number and build date of the AT-S63 management
software.
Bootloader
The version number and build date of the AT-S63 bootloader.
The Hardware section displays the following information:
Model Name
The model name.
Serial Number
The switch serial number.
Temperature (Deg.C)
The current system temperature.
Upper Temp. Threshold (Deg C)
The upper threshold for the switch temperature.
Fan 1 Speed RPM/Status
Fan 2 Speed RPM/Status
The speed or operating status of the system fan(s).
The Voltage section provides the current voltage of the six power
supplies in the switch, identified as 2.5 V, 3.3 V, 5 V, 1.8 V, 1.25 V, and
12 V.